Microwave Power Inverter

Royal Power's 1500 watt power inverter can operate 12.5 amps of electrical components. This DC to AC power inverter includes digital monitoring which allows you to view battery voltage levels and wattage load applied to the system. A 12 volt dc to 120 volt ac power inverter connects directly to direct current power supply and output a standard 120 volt modified sine wave current. This inverter can handle small compressors and some low draw motors.

The 2000 watt 12 volt dc to 120 volt ac (PI-2000) power inverter connects directly to a 12 volt battery and converts power into 120 volt home current. This power inverter includes digital LED monitoring system that help monitor wattage applied and battery voltage levels. This unit has three standard household outlets. With 2000 watts of power a large range of equipment will run easily with this power inverter, and with reinforced steel columns and mounting plate it is ideal for mobile applications.

The (PI-3000) 12 volt dc to 120 volt ac power inverter is a powerful 24.25 amps back up power supply. With the use of a 12 volt direct current battery source you can convert power into 120 volt standard household current. With 3000 watt power you can power all types of microwaves and many air conditioner systems up to 8000btu of power. This DC to AC power inverter includes 3 standard outlets and digital monitoring system which allows you to view the battery voltage levels and wattage load applies.

5000 Watt Power Inverter12 Volt DC To 110 Volt AC

The Royal Power 6000 watt 12 volt dc to 120 volt ac power inverter is a large 50 amp complete home backup. The PI-6000 dc to ac power inverter includes hardwire kit option which allows you to wire the power inverter direct into your home system. By connecting to a 12 volt battery system you can then power your standard household electronics. With 6000 watts of power you can power all types of power tools, large compressors, and large heating and cooling system. This unit also includes digital LED wattage-voltage meter which helps level monitoring.

This complete home UPS includes intelligent 20 amp charger and automatic transfer which. By simply connect the dc cables to and 12 volt direct current power source and plugging the ac charger cord into any home outlet you with now have a 2000 watt home ups setup. This inverter is specially designed to be used as an emergency home back up for submergible water pumps in the event of a power outage. The inverters built in charge will charge your batteries to complete charge and then go into a float mode with no concern of overcharging. The inverter will self detect loss of utility power and then switch to battery backup during and outage and switch back to utility power once home current is restored.

The 3000 watt 12 volt dc to 120 volt ac power inverter with 20 amp charger and automatic transfer switch provides 24.25 amps home backup power. This unit connects direct to a 12 volt battery and uses that direct current to power your home electronics in the case of a power loss. The inverter will auto detect a loss in home power and switch to battery power, once power is restored the units built in charge will the begin recharging the battery bank until complete charge is restored. The power inverters 4 outlets will remained powered when utility power is available but will then be powered by your home current.

5000 Watt Power Inverter Charger 12 Volt DC To 110 Volt AC

This 50 amp complete home backup includes hardwire options for charging and auto transfer options. The unit can provide 50 amps of AC power through its 6 standard outlets. This unit also includes a 50 amp charger and automatic transfer switch, unlike the PIC-2000 and PIC-3000 this unit requires the charger to by hardwired into your main breaker. The 50 amps of current is simple to powerful to be plugged into a standard 15 to 30 amps wall outlet. This large power inverter can function a true complete home ups with 6000 watts of load capability your home can remain operational during power losses.

This Royal Power 3000 watt 24 volt dc to 120 volt ac power inverter takes direct current from a 24 volt system and converts it into 120 volt alternating current. This unit can handle up to 24.25 amps of 120 volt current. With 3000 watts of ac current a large range of power tools and construction equipment can be used. From power drills, circular saws, large water pump and full size heating and cooling systems will run well with this power inverter. This dc to ac power inverter also includes digital wattage and voltage monitoring and that wireless remote.

This 24 volt direct current to 120 volt alternating current power inverter can handle up to 50 amps household devices. This 6000 watt power inverter includes full hardwire kit which allows you to wire the power inverter directly into your circuit panel. This unit includes four outlets and all 50 amps can pulled through any one outlet. The PI-600024 also includes digital LED display, this display allows you to monitor the watts applied to the power inverter and the voltage level of the battery bank. With 6000 watts power inverter a full home can easily be backed up during outages.

The (PI-200024) is a 2000 watt 24 volt direct current to 120 volt alternating current power inverter. This unit takes power from a 24 volt battery system and converts it into 120 volt standard home alternating current. This dc to ac power inverter can power all types electronics up to 16.7 amps of ac power. This unit also includes a wireless remote and digital LED wattage and voltage monitoring. This unit is completely fuse protected against surges all fuses are replaceable in the event one is blown. In most case the dc to ac power inverter will just shutdown in alarm mode prior to fuses blowing out.

This 1500 watt 24 volt dc to 120 volt ac power inverter is an ideal design for mobile applications. With wireless remote access and mounting brackets this dc to ac power inverter can be installed beneath your truck cabin and then power up to 100 feet away with the remote. The PI-150024 can operate between the voltage range of 20-30VDC and provide you with 12.5 amps of alternating current. This unit also includes digital wattage and battery voltage display and built-in cooling fans.

The Royal Power 1000 watt pure sine power inverter output a clean wave of alternating current. With puresine wave output this dc to ac power inverter can be used to operate medical and high end audio equipment up to 1000 watts of AC power. This unit includes wattage and battery voltage LED display. This unit takes dc power from a 12 volt battery and converts it into 120 volt home power.

This 1500 watt 12 volt dc to 120 volt ac pure sine wave power inverter takes direct current from a 12 volt source and converts the current into pure wave household current for power on the go. With smooth output wave this dc to ac power inverter can run any type of electronic including devices with heating elements that sometimes are unable to run off a modified sine wave power inverter. This 1500 dc to ac power inverter can power up to 12.5 amps of electrical devices, with digital wattage display you can monitor the exact load applied.

The PS-2000 is a 16.7 amp pure sine wave dc to ac power inverter use current from a 12 volt battery and inverts the power into 120 volt alternating current. The output wave is pure sine which is as clean as a standard home outlet, the output voltage remains steady with no corruption. Because the inverter has such as clean output wave it is ideal to use with sensitive audio and medical equipment. This 12 volt dc to 120 volt ac power inverter is completely fuse protected and will not damage under standard dc and ac surges.

This DC to AC power inverter takes a 12 volt direct current from a battery and inverts it into 120 volt pure wave ac power. With 3000 watts of ac power you can operate a full range of devices up to 24.25 amps . This unit includes 3 standard outlets, wireless remote and digital LED wattage-voltages display. With under 3% of harmonic distortion this inverter can run any type of electronics.

This charge controller help control the charging current that sent from your solar panels to your dc battery bank. This 30 amp charge controller and be used with 12 volt and 24 volt battery banks. All solar power systems require a charge controller so that your charging current doesn't damage your reserve power.

This 50 amp charge controller can be used in a large solar power system. With 12 volt and 24 volt options this system can be used with a large verity of battery banks. The solar charge controller takes charging current from the solar panels and regulate the output current to either 12 volt or 24 volt.

Royal Power 60 amp solar charge controller allows you to charge your 12 volt and 24 volt battery banks at a rate of 60 amps per hour. The solar panels pull the solar energy into the panels and the send the charging current through the charge controller and the then output a charging current of 12 volts or 24 volts.

Royal Power 40 amp solar charge controller allows you to charge your 12 volt and 24 volt battery banks at a rate of 40 amps per hour. The solar panels pull the solar energy into the panels and the send the charging current through the charge controller and the then output a charging current of 12 volts or 24 volts.

This charge controller help control the charging current that sent from your solar panels to your dc battery bank. This 25 amp charge controller and be used with 12 volt and 24 volt battery banks. All solar power systems require a charge controller so that your charging current doesn't damage your reserve power.

This charge controller help control the charging current that sent from your solar panels to your dc battery bank. This 20 amp charge controller and be used with 12 volt and 24 volt battery banks. All solar power systems require a charge controller so that your charging current doesn't damage your reserve power.

Royal Power 40 amp solar charge controller allows you to charge your 48 volt battery banks at a rate of 40 amps per hour. The solar panels pull the solar energy into the panels and the send the charging current through the charge controller and the then output a charging current of 48 volts.

Royal Power 50 amp solar charge controller allows you to charge your 48 volt battery banks at a rate of 50 amps per hour. The solar panels pull the solar energy into the panels and the send the charging current through the charge controller and the then output a charging current of 48 volts.

Royal Power 60 amp solar charge controller allows you to charge your 48 volt battery banks at a rate of 60 amps per hour. The solar panels pull the solar energy into the panels and the send the charging current through the charge controller and the then output a charging current of 48 volts.

400 Amp Jump Starter with 1700 amps of peak power. Also includes 260 psi air compressor.

MPPT60 60A solar controller applied to the solar photovoltaic system which is used to coordinate solar panels, storage battery and load.